What are the benefits of steam or warm mist?

Inhaling steam or warm mist is a natural way to soothe and open the nasal passages.  The warm moist air helps loosen the mucus in the nasal passages and throat and can provide temporarily relief from the symptoms of colds, allergies, nasal dryness, dry mouth/throat, nosebleeds or sinus infection. 

Will it get rid of my cold?

PureGuardian personal steam inhaler will not get rid of your cold but may help temporarily reduce some of the uncomfortable symptoms experienced before or during a cold.

What types of allergies does the inhaler help?

The PureGuardian personal steam inhaler can temporarily provide relief from allergy symptoms for those suffering from common environmental allergies like pollen or dust allergies.

ABOUT PUREGUARDIAN STEAM INHALER

What is included in the PureGuardian personal steam inhaler kit?

One inhaler, 1 power pack & cord, 2 medical grade latex-free soft face masks (1 small mask, 1 standard/large mask), 1 aroma pad, 1 tote bag

Is the mask latex-free?

Yes.

Is the mask removable?

Yes the masks are removable, but the inhaler cannot operate without a mask attached.

Does the mask fit children? Is it safe for children to use?

There is a smaller mask that can fit older children and young adults. It is recommended for children over the age of 13.  As with any electrical appliance, it should be used under supervision of an adult.

How much water does the tank hold?

The max fill line is 25ml.

How long is the cord?

Approximately 8”

How long does it run?

Depending on the heat setting selected, the unit will run 20-22 minutes a session.

Can I purchase additional masks? 

Yes, replacement masks are available at www.guardiantechnologies.com.

TECHNICAL/ TROUBLESHOOTING

Why does the inhaler fan still run after shut off?

Each time the inhaler is turned off the fan will run for 10 minutes to dry internal parts of the device. It will automatically stop when complete. Once it is complete you can remove the cap to the reservoir and empty the remaining water. The drying cycle is important to keep the internal parts of your device clean.

* IMPORTANT: Do not interrupt, refill reservoir, unplug or turn off the device when the fan is running the drying cycle*

Why do I hear a change in the sound of the motor as the unit is running?

There is nothing wrong, the unit is just cycling through a few heating cycles as its being used. The change is noise is just the water cycling through the unit and turning into a clean steam.

Why does the steam temporarily cool down mid-use? 

There is nothing wrong, the unit just cycles through a few heating cycles as its being used. It’s just the water cycling through the unit and turning into a clean steam. This change in temperature also provides temporary relief from the heat during use.

Why did the inhaler stop working or why won’t it start?

• Check the water level and add more distilled water if needed. Do not overfill.

• Check that the plug is inserted into both the unit and the wall outlet.

• Make sure that the water used was distilled water. 

Why doesn’t it feel like I am getting enough steam?

The PureGuardian mist inhaler provides a very warm, ultra-thin mist, therefore it is hard to see.

What do the different colors on the control panel mean?

From top to bottom:

Red – Low/Empty water level

Orange – Drying mode cleaning cycle

Blue – hi/lo temperature selection

Green – Power

Flashing Green – Error indicator

How to stop the inhaler from blinking green?

Check and make sure you are using distilled water. Please replace current water with distilled water. You may have to do this repeatedly until the light stops blinking.

The inhaler may be tipped over too far. Hold the inhaler upright when using.

EASE OF USE 

Can I use regular water with the inhaler?

No. Use distilled water ONLY.  Tap, bottled and filtered water contain minerals that are not compatible with the product.  The product will not work unless distilled water is used. Water not included with product.

IMPORTANT: Please note that using any additives in the water tank, any other liquid or water with minerals (e.g. bottled, purified, or boiled water) will damage the device and will void the warranty. 

Can I use bottled or filtered water with the inhaler?

No. Use distilled water ONLY.  Tap, bottled and filtered water contain minerals that are not compatible with the product.  The product will not work unless distilled water is used. Water not included with product.

IMPORTANT: Please note that using any additives in the water tank, any other liquid or water with minerals (e.g. bottled, purified, or boiled water) will damage the device and will void the warranty.

Where can I get distilled water?

You can find distilled water at most local grocery stores.

How long does it take the inhaler to produce steam?

After pressing the ON button, the water will take approximately 1-2 minutes to heat up.

What if I need to take a break from the mist? Can I turn the inhaler on and off again shortly after?

Yes, you can turn the inhaler on and off as much as you want. You just want to make sure you let it run the drying cycle once finished.

How often and how long should I use the mist Inhaler?

It is not recommended to use the inhaler longer than 20 minutes in one sitting. However, you can repeat the steam inhalation 2-3 times per day as necessary.

Can I leave water in the reservoir if I do not use all of the water?

You can leave the water in the reservoir temporarily. If you do not plan to use the inhaler for a long time and want to store it, then please empty out the water before storing and allow the unit to run the drying cycle.

Can I unplug the inhaler while it is running?

No. The device must remain plugged in when in use. It also needs to remain plugged in when the fan is running the drying cycle after turning the inhaler OFF.

Can I use the inhaler while lying down?

No. Use inhaler in the upright position only.

How do I make the mist cooler / warmer?

You can select either low or high temperature mist.  Push the (-) for low or (+) for high.

How much water do I need to put into the inhaler?

Fill water tank to the max fill line with distilled water only. Do not overfill.

Can I add other ingredients such as aromatherapy oils?

Only add aromatherapy oils onto the aroma pad in the oil tray. Oils added into the water tank will damage the tank and the whole unit. Any use of such additives in the tank will void the manufacturer’s warranty.

Where can I get aromatherapy oils for my inhaler?

PureGuardian aromatherapy oils are sold on our website: www.guardiantechnologies.com.

Where can I get additional aroma pads for my inhaler?

PureGuardian aromatherapy pads (model: FLTMST12PK) are sold on our website: www.guardiantechnologies.com.

MAINTENANCE

How do I clean the inhaler?

Empty and dry the reservoir after each use. If needed the inhaler dry cycle can be manually started. When the device is in sleep mode or in water empty mode, press the low temperature button and hold for 5 seconds, then the device will come to the drying cycle. Periodically you may clean the outside of the device with a damp cloth. Make sure the device is unplugged while cleaning the outside.

Can I wash the masks in the dishwasher?

No. Do not put the masks or the device in the dishwasher. Clean the mask with soap and water. Do not use abrasives to clean.

Can I run the unit under water to clean it?

No, clean the outside of the device with a damp cloth. You can remove the masks and clean with soap and water.

Do I need to store the unit in its bag when not in use?

No, but we recommend storing the unit in a safe place where it won’t be damaged. Make sure there is not any water in the unit before storing. Store in a cool, dry location.

WARRANTY

How long is the warranty?

1 Year